Advanced Metal Curving has the ability to curve Flat Bar either On Edge or On Flat. We can curve Flat Bar from 20 x 3 mm all the way up to 250 x 25 mm.
We can also curve Flat Bar on the flat (as a Band)
Refer to the Capacity Chart below for more Curving options offered by Advanced Metal Curving
Material Size | Direction of Curve | Min Inside Radius | Min Green Required per length |
| 20 x 3 mm | On Edge | 200 mm | 600 mm |
| 25 x 3 mm | On Edge | 200 mm | 600 mm |
| 32 x 3 mm | On Edge | 200 mm | 600 mm |
| 50 x 5 mm | On Edge | 250 mm | 600 mm |
| 75 x 6 mm | On Edge | 300 mm | 600 mm |
| 90x 6 mm | On Edge | 400 mm | 600 mm |
| 100 x 6 mm | On Edge | 1000 mm | 700 mm |
| 150 x 10 mm | On Edge | 1200 mm | 1200 mm |
| 150 x 20 mm | On Edge | 800 mm | 1200 mm |
| 200 x 12 mm | On Edge | 1500 mm | 1200 mm |
200 x 25 mm | On Edge | 700 mm | 1200 mm |
200x 40 mm | On Edge | 2200 mm | 1400 mm |
250 x 12 mm | On Edge | 8000 mm | 1400 mm |
250 x 20 mm | On Edge | 2000 mm | 1500 mm |
250 x 25 mm | On Edge | 2000 mm | 1500 mm |
All rolled sections require green or lead, depending on material & machine type.
We have bandsaw capabilities and the ability to trim green from the finished product.
18 Krypton Court
Carole Park, Q 4300
Tel : 07 3271 2225
Fax : 07 3271 1134
Sales & Enquiries
Mon - Fri : 7am - 3:30pm
Sat : 6am - 11:00am
Saturday By Appointment Only
